DJ-Stuff.net for a complete listing of Phantom Power Supplies deals. The big names in Phantom Power Supplies at low, low prices, plus many Phantom Power Supplies accessories.
Last Updated: 06-Feb-12
Why risk running out of batteries mid-session -- or worse, getting a phantom power 'brown-out' in the middle of a take? Why keep spending on 9V batteries at all when you can have constant, reliable power? If you have the Phantom II, you ought to have this.
Condenser microphones usually specify different requirements for their phantom power. These ratings can range from 48 Volts all the way down to 9 Volts. Fortunately, there?s a certain amount of flexibility with matching Phantom Power voltage to your mic.
A 24-volt condenser mic will run perfectly on 48 volts. In fact, mics rated at as little as 9 volts can often operate on 48 volts, but you should check with the manufacturer first. Conversely, a mic will generally perform best driven by not less than its rated voltage so, for a 48-volt mic, you would obtain best results with 48 volts of phantom power. The Phantom III is a great choice for these needs.
Audio Technica CP8506 4-Channel 48V DC Phantom Power Supply
These line-powered devices allow the use of remote-powered microphones with systems that do not supply phantom power. Each unit features a highly-regulated power supply which provides a constant voltage source, even with a heavily-loaded input. The regulator IC is internally protected to prevent overheating or damage even if shorted. The rugged steel case is finished in enamel and provides shielding from electrostatic interference.
Audio Technica AT8801 Single Channel Power Supply for Microphone
This line-powered device allows the use of remote-powered microphones with systems that do not supply phantom power. Each unit features a highly-regulated power supply which provides a constant voltage source, even with a heavily-loaded input. The regulator IC is internally protected to prevent overheating or damage even if shorted.
The PB223 is for powering phantom powered microphones with 48VDC. Since the units use a 100KHz switching power supply there is no audio noise generated.
Rolls RPB623 6-Channel Rackmount Phantom Power Supply
The Rolls Phantom Hex provides 48-volt phantom power to condenser mics through 6 channels. It is ideal for digital multi-track recorders with no phantom-powered mic inputs. Each channel includes one balanced XLR input and one 1/4 in. TRS balanced output conveniently located on the rear panel out of harm's way. Front panel LEDs indicate which channels are connected and drawing power.
